Theben SELEKTA 170 top2 Page 25 Manual Download

Page: 25 / 118

Page | 25

Press OK to confirm the ASTRO menu. Then press button ► four times and press OK
to confirm.

COUNTRY

– COORDINATES – END

Note:

By using the OBELISK top2 memory card, up to 10 further towns/cities (= favourites) can be added.

7.5.1. LOCATION: Country

Press the MENU button to open the main menu from auto mode.

Press OK to confirm the ASTRO menu.

Press button ► three times until LOCATION appears and press OK to confirm.

Press the OK button.

Use the buttons ◄ and ► to enter the COUNTRY, then press the OK button.

Use the buttons ◄ and ► to enter the TOWN/CITY, then press the OK button.

The system returns to LOCATION. The menu can be exited with the MENU (ESC)
button.

Summary of Contents for SELEKTA 170 top2























































































































Search results

Summary of Contents for SELEKTA 170 top2

Reviews:

Related manuals for SELEKTA 170 top2

Brands by name

Popular brands

Theben SELEKTA 170 top2, Manual

Search results

Summary of Contents for SELEKTA 170 top2

Reviews:

Related manuals for SELEKTA 170 top2

Brands by name

Popular brands