Theben Luna 129, Operating Instructions Manual

Page: 5 / 12

8 8..
E Elle eccttrriicca all cco on nn ne eccttiio on n
9 9..
C Ch he ecck kiin ng g tth he e cco on nn ne eccttiio on n // tte esstt ffu un nccttiio on n
P Prre ecco on nd diittiio on n ffo orr tth he e tte esstt ffu un nccttiio on n::
The device must be connected.
FFu un nccttiio on n::
If the TTe esstt button is pressed briefly (< 2 seconds), the
connected lamp should light up for about two minutes,
regardless of the brightness level set.
TTe esstt o orr cca an ncce ell tte esstt::
1 1.. Press the TTe esstt button.
IIff tth he e lla am mp p d do oe ess n no ott lliig gh htt u up p::
2 2.. Check the lamp and/or the connection.
1 10 0..
A Accttiivva attiin ng g//rre ep plla acciin ng g tth he e b ba atttte erryy
A Accttiivva attiin ng g tth he e b ba atttte erryy::
1 1.. Pull the insulating strip out of the
battery compartment (see Fig. 1)
2 2.. Using a pointed object, press the
Reset button for about 1 second
IIn nffo o:: The year 2002 must appear in the display.
R Re ep plla acciin ng g tth he e b ba atttte erryy::
1 1.. Remove the battery holder from
the battery compartment.
2 2.. Dispose of the used battery in an
environmentally-friendly manner.
3 3.. Note the correct polarity.
4 4.. Insert the new battery in the
battery holder.
5 5.. Press the battery holder down
until it engages audibly.
6 6.. Using a pointed object, press the Reset button for
about 1 second
IIn nffo o:: The year 2002 should appear in the display.
1 16 6
Batterytyp CR 2450
Fig. 1
Fig. 2