The status information from the connected time switches ap-
pears in the
Monitor
register; e.g. Date/time,
upgrade module, channel, PIN, On switching times etc.
(see fig.).
Press
Refresh
. The data is requested from the time
switch
.
Changing update time
You can change the upgrade time (2 s to 10 min) in the
Options
menu under
Refresh time
.
3
The
Direct commands
register allows you to directly perform
actions for each channel (continuous ON, continuous OFF, man-
ual ON, manual OFF, start timer, activate special programmes
and reset the operating hours counter).
You can also change the date/time and enter or delete PIN
(see fig.).
Select action and press
Send
.
The connected time switches appear
(e.g. TR 644 top2 RC) (see fig.).
Select desired time switch.
You can also change the name of the time switch here. The new
name is only stored in the LAN software on the PC and not and
not in the EM LAN top2 module.
Press
Change name
, enter new name and
press
OK
.
Press
Connect
.
The operator interface appears with remote access to selected
time switches. It is operated via 3 registers:
1.
Monitor –
Status information from the time switch
2.
Direct commands – Access to the time switch
3.
Communication –
Program and settings
