LAN top2 software
The LAN top2 software is available for download to
www.theben.de/produkt/6490900
. In addition to functional
description, technical details, the software is available under
Downloads.
Starting LAN top2 software.
The home page opens with the following window:
1. How can you find LAN modules?
– automatically in the LAN: The LAN top2 software searches
for the connected LAN modules and lists them.
– by entering an IP by hand: The IP address of a LAN module
can be entered directly in a separate window.
– by reading IPs from a file: A file in text format is selected
that lists the IP addresses.
2. Response at restart
– show this window again
– execute last choice
Make selection.
2
A list of IP addresses then appears (see fig.).
Select IP address.
You can change the IP addresses and the name of the EM LAN
top2 module.
Press
Change IP address/name
enter new IP address/
new name and press
OK
.
Press
Connect
.
• Cable types for DATA bus (max.100 m): Sheathed cable:
NYM (3 x 1.5 mm
2
); MSR cable:
PYCYM, YCY (2 x 2 x 0.8 mm
2
)
telephone cable: J-Y(St)Y (2 x 2 x 0.8 mm
2
)
Bell wire: YR
• Power supply at DATA bus: 50 mA
(maximum current at DATA bus:
500 mA)
• Mode of operation: Type 2 in accordance with EN 60730-1
• Pollution degree: 2
Technical data
• Operating voltage: 230 V~, +10 %/-15 %
• Frequency:
50-60 Hz
• Power consumption: typically 7.5 VA
• DATA bus:
Bus voltage: 15 V DC, low
voltage in protection class III (SELV)
• Permissible ambient temperature: –30 °C ... +50 °C
• Protection class:
II in accordance with EN 60730-1 with
designated installation
• Protection rating: IP 20 in accordance with EN 60529
