IPsecure Interface KNX
Device technology
18
2.5
Description of inputs and outputs
Supply voltage input 12 to 30 V DC
Only a DC voltage in a range of 12 to 30 V may be connected to the power supply input. We recommend using an
power supply 640 mA S KNX from our range. It is also possible to power the Interface via the voltage output
without choke of an Theben KNX power supply.
Caution
The supply voltage must be 12 to 30 V DC, or the device is powered via PoE (Power over Ethernet) according to
IEEE 802.3af class 1.
Connecting the device to a voltage outside the permissible range can destroy it!
KNX connection
The supplied bus connection terminal is used to connect to the KNX bus.
Note
Programming requires ETS (ETS 5 version 5.7.4 or higher).
LAN connection
The network connection is carried out via an Ethernet RJ45 interface for LAN networks. The network interface can
be operated with a transmission speed of 10/100 Mbit/s. Network activity is indicated by the LAN/LINK LED on
the front of the device.
