1
thePrema S360 DALI UP WH
2070525
thePrema S360 DALI UP GR
2070526
307184
1103077301
Presence detector
EN
1. Product characteristics
•
Passive infrared presence detector for ceiling installation
•
Square detection area 360° (up to 64 m
2
) for reliable and
easy planning
•
Automatic lighting control with constant lighting control
or switching operation
•
Constant lighting control with standby function
•
Lighting dimmable in switching operation with standby
function
•
Easy to start-up without programming group addresses
(DALI Broadcast)
•
Mixed light measurement suitable for fluorescent lamps
(FL/PL/ESL), halogen/incandescent lamps and LEDs
•
Calibration of brightness measurement
•
Fully or semi-automatic operation, switchable
•
Brightness setpoint value adjustable in lux
•
Teach-in function via remote control or button
•
Self-learning time delay
•
Reduction of time delay when present briefly (short-term
presence)
•
Detection sensitivity configurable
•
Connection option for buttons for manual dimming and
switching
•
Behaviour upon button operation selectable
•
Scene functionality
•
Ready for immediate use due to factory presetting
•
Exceptionally easy configuration of the energy-saving
response with „eco plus“ function
•
Test mode for checking function and detection area
•
Extension of detection area via Master/Slave or Master/
Master switching
•
Ceiling installation in flush-mounted box
•
Surface mounting on ceilings possible with back box
(option)
•
User remote control „theSenda S“ (option)
•
Management remote control „SendoPro“ (option)
•
Installation remote control „theSenda P“ (option)
2. Safety
Danger of death through electric shock or fire!
Installation should only be carried out by a quali-
fied electrician!
WARNING
•
Work on electrical systems may only be carried out by
qualified electricians or by instructed persons under the
guidance and supervision of a qualified electrician in
accordance with the technical regulations applying to
electricity!
•
Comply with the country-specific safety regulations for
work on electrical systems! Ensure absence of voltage in
the cable before installation!
•
The device is maintenance-free. If the device is opened
or penetrated with any object, the guarantee lapses.
3. Proper use
The presence detector is intended for interior installation. The
presence detector is exclusively intended for the use as con-
tractually agreed between the manufacturer and the user. Any
other use is considered to be unacceptable. The manufacturer
does not accept liability for any resulting damages.
4. Function
The presence detector is primarily used in offices, schools,
conference rooms and corridors, as well as in homes, for easy
and energy-efficient control of lighting. The lighting is accor
-
dingly influenced by switching or constant lighting control.
Function description
Mixed light measurement
Presence detection
Artificial light
Button for manual lighting control
Incident daylight
Settings on thePrema S360 DALI
Brightness setpoint value (lux)
Lighting time delay
Lighting standby time
Standby brightness value
DIP-Switch:
DIP1
Fully automatic device/semi-automatic
DIP2
Constant lighting control: on/off
DIP3
Response to manual override:
school/office
DIP4
Adjustment of the brightness setpoint value
via button: on/off
DIP5
Short-term presence: on/off
DIP6
Operating mode: normal operation/presence
test (walking test)
