3. operation
The unit has automatic input format detection and adjusts the output to match
the input. The unit is not equipped with scaling technology and will not change
the format of the signal in any way.
1. Connect unit to power and (if applicable) connect auxiliary equipment to
the converter’s AC outlet.
2. The unit will boot and LEDs may flash in a random sequence.
3. If no video input is detected, the Power/Signal LED will light up Red
4. As soon as a valid video signal is detected on the input connector, the
Power/Signal LED will turn Green and the Signal Type LEDs will indicate the
detected signal type (3G/HD/SD).
5. The output plugs become active immediately after a valid signal has
been detected.
TiP :
Treat all your fiber optic equipment with care and perform frequent
cleaning of the optical contact surface to ensure a degradation-free
performance over time.
Warranty
Limited warranty
Your xVision® Video Converter includes a 2-year limited warranty. Please see
the included warranty card for more information.
