Theatrixx XVision TH-FIBER2SDI-T1 User Manual Download Page 4

Safety and compliance

cQPSus

This equipment has been 
tested and meets the following conformance standards :

-   CAN/CSA-C22.2 NO. 60950-1-07 - Information Technology Equipment 

- Safety - Part 1 : General Requirements - Second Edition ; including 
AMD 1 :2011 and AMD 2 :2014

-   UL 60950-1 - UL Standard for Safety : Information Technology 

Equipment - Safety - Part 1 : General Requirements - Second 
Edition ; Reprint with Revisions Through and Including October 
14, 2014

FCC Class A Notice

This device complies with Part 15 of the FCC Rules. Operation is sub-
ject to the following two conditions :

1. This device may not cause harmful interference.

2.  This device must accept any interference received, including inter-

ference that may cause undesired operation.

Note :

 This equipment has been tested and found to comply with the limits for a Class A digital 

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference when the equipment is operated in a commercial envi-
ronment. This equipment generates, uses, and can radiate radio frequency energy, and if it is not 
installed and used in accordance with the instruction manual, it may cause harmful interference 
to radio communications. Operation of this equipment in a residential area is likely to cause 
harmful interference, in which case the user will be required to correct the interference at his 
own expense.

European Union

This equipment has been tested and meets the following confor-
mance standards :

-   IEC 60950-1 :2006 : Safety of information technology equipment  

+ A11 :2009 + A1 :2010 + A12 :2011 + A2 :2013

-   EN 55022 :2010 : Information technology equipment - Radio dis-

turbance characteristics - Limits and methods of measurement

iCES-003 Class A Notice - Avis NMB-003, Classe A

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme NMB-
003 du Canada.

WARNiNG

  

 

   

Changes or modifications not expressly appro-

ved by Theatrixx Technologies could void the 

user’s authority to operate the equipment.

Summary of Contents for XVision TH-FIBER2SDI-T1













Reviews: