Main Wing
Stabilizer & Elevator
Temporary install the main wing, adjust leveling of the stabilizer
to make it as parallel to the main wing as possible.
*Also refer to step 19 Wing Setting
(Stabilizer)
(Main Wing)
B
B=B
B
A=A
A
A
Completed
Completed
Apply instant type CA glue to
both sides of each hinge.
Wing Joiner
P.4
3
4
Please dry fit wing joiner into left and right wing to make sure they fit with the proper
dihedral angle, mark the wing joiner if necessary. Apply epoxy glue to both sides of
all surfaces in contact. Use a stick to apply the glue to inner side of wing joiner sleeve,
and apply the glue to wing joiner before putting them together. Wing joiner not glued
properly will lead to wing failure and plane crash.
Remove coverings for all surfaces in
contact before applying A/B epoxy glue.
A246PO28151211
