![The World Models Manufacturing Sky Runner Instruction Manual Download Page 10](http://html.mh-extra.com/html/the-world-models-manufacturing/sky-runner/sky-runner_instruction-manual_1101054010.webp)
P.9
Important Safety Precautions
#First time flyer should never fly by himself/herself.
Assistance from experienced flyer is
absolutely necessary.
#Pre-flight adjustment must be done before flying,
it is very dangerous to fly a badly
pre-adjusted aircraft.
#
is specially designed to be powered by
speed 400 geared
motor.
#Make sure the air field is spacious,
never fly the plane too close to people and never get
too close to a running propeller.
#If you find wrinkles on the covering as a result of weather changes,
you can use hot iron
to remove the wrinkles.
Please begin with lower temperature setting and gradually raise
the temperature until the wrinkles are gone.
Too hot an iron may damage the covering.
#Check and re-tighten up all factory assembled screws,
use thread locker if applicable.
Warning!
P.9
C.G
.
13
The ideal C.G. position is 52mm (2.0 in.) behind
the leading edge measured at where the wing
meets the fuselage.
In order to obtain the C.G.
Specified,
add weight to the fuselage or move
the battery position.
Check the C.G.
Before
flying.
E2400606
Contro l Thro ws
25mm
25mm
12
6mm
Aileron
6mm
6mm
6mm
Rudder
Elevator
52mm
52mm
C.G.
C.G.
2.0 in.
2.0 in.
Adj ust the con trol thr ows as sho wn in the
di agr am .
The se thr ows ar e good for gen er al
flyi ng.
You ca n adj ust ac cor di ng to you r
per son al pr ef er enc e.