I N D E X
I N D E X
BEFORE YOU BEGIN
BEFORE YOU BEGIN
PARTS LIST
PARTS LIST
ASSEMBLY
ASSEMBLY
SAFETY PRECAUTIONS
SAFETY PRECAUTIONS
P. 1
P. 1
P. 2
P. 2
P. 3 -9
P. 3 -9
P.9
P.9
BEFORE YOU BEGIN
BEFORE YOU BEGIN
Read through the manual before you begin, so you will have an overall idea of what to do.
P . 1
Symbols used throughout this instruction manual comprise of the following : -
Apply epoxy glue.
Apply epoxy glue.
Assemble left and right
sides the same way.
Assemble left and right
sides the same way.
Peel off shaded portion
covering film.
Peel off shaded portion
covering film.
Drill holes with the specified
diameter (here: 3mm).
Drill holes with the specified
diameter (here: 3mm).
Pay close attention here!
Pay close attention here!
Pierce the shaded portion
covering film.
Pierce the shaded portion
covering film.
Do not overlook this symbol!
Do not overlook this symbol!
Must be purchased separately!
Must be purchased separately!
Cut off shaded portion.
Cut off shaded portion.
Ensure smooth non-binding
movement while assembling.
Ensure smooth non-binding
movement while assembling.
Apply instant glue
(C.A.glue, super glue.)
Apply instant glue
(C.A.glue, super glue.)
Check all parts. If you find any defective or missing parts contact your local dealer. Please DRY FIT
and check for defects for all parts that will require CA or Epoxy for final assembly. Any parts you
find to be defective after the gluing process may be difficult to remove for warranty replacement. The
manufacturer will replace any defective parts, but will be difficult to extend to the good parts that are
good before gluing to defective parts during assembly.
