CITY LITE Model Version 1.0
3
1.
Setting Up Your CITY LITE
Slide the Controller into the open slot on the arm of the CITY LITE on the right side (unless pre-ordered
for left-handed users). Tighten knob to secure controller and connect controller wire harness to controller
CPU wire harness that runs from the chair itself. You will then need to install the seat cushions.
To help maintain your CITY LITE and keep it in top operational condition, y
ou’ll find a handy toolkit
included, which can be kept under the seat for convenience. Every three months, examine all of the
screws and bolts that construct your CITY LITE and tighten anything that seems loose. If you have
recently taken your CITY LITE on an airplane, be sure to examine the entire frame and all screws and
bolts for any damage during baggage handling.
NOTE: Keep your CITY LITE clean and dry and you will ensure that you have a long life of use from your
wheelchair.
1. Slide in Controller
2. Tighten Knob
3. Connect Wire Harness*
Secure the connection by twisting the coupling
ring over the connected harness.
*NOTE: Make sure connector pins in wire
harness are lined up properly; do NOT
force the wire harness connections
together or you will bend or break the pins.
4. Connect Battery Harness
