TSL-470 SOAP DISPENSER MANUAL 7
commissioning
Fill the reservoir with soap and operate the dispenser until soap is dispensed from the
spout.
operation
The cap is depressed by the user, which draws a measured amount of soap
0.03 fl oz along the feed pipe from the reservoir, then through the pump, and the soap
is dispensed from the spout onto the user’s hands.
7
Place the soap reservoir within 6 feet
of the dispenser and run the pipe
from the dispenser to the reservoir
ensuring there are no kinks in the
pipe. For single-feed systems, place
the tube-support cap onto the soap
reservoir and screw on by hand
(no tools are required for this). For
multi-feed pipe-sets, simply place the
manifold in to the neck of the soap
reservoir ensuring that the ends of the
soap pipes are in the soap.
