6 TSL-470 SOAP DISPENSER MANUAL
how to install
5
Once the dispenser is secure & correctly
orientated, assemble the second locknut.
Use 2 wrenches (one on each nut) and
firmly lock the nuts together. Ensure you
maintain the correct orientation of the
dispenser during this operation.
6
Press the elbow connector onto the
straight pipe connector at the rear of
the dispenser. Insert the pipe-barb into
the PVC hose, and this connector can
then be pressed into the previously fitted
elbow connector.
3
Pass the dispenser tail through the
mounting hole and place the rubber
backing disc and steel disc over the
dispenser tail.
4
Assemble the 1st brass locknut onto the
dispenser tail ensuring that the outlet
nozzle is pointing downwards. Tighten the
nut by hand against the backing disc, and
then tighten using a wrench 1 full turn.
Tighten the nut only sufficiently enough
to secure the dispenser – over-tightening
may damage both the dispenser and the
building fabric.
