MONOLITH BASIN SYSTEM MANUAL 17
damage prevention
Some chemicals are not compatible with The Splash Lab solid surface. Contact should be avoided with the
following chemicals:
+
Strong chlorinated solvents
+
Chloroform
+
Ketones
+
Methylene chloride (paint removers)
+
Very strong acids such as concentrated sulphuric and hydrochloric acids
+
Acid drain cleaners should not be used.
Surfaces exposed to these agents should be promptly flushed with water. Contact for even a short period of
time can cause surface damage, spots, or staining. Follow the recommended repair procedures described
above as needed to repair and/or restore the surface to its original condition. Severe damage caused by
incompatible chemical contact will require professional repair. Again, contact The Splash Lab technical
department for assistance.
faucets
See
individual
instal maintenance
guide
for sensor faucets (where applicable)
soap dispensers
See
individual instal maintenance guide for
soap dispensers (where applicable)
