— E6 —
Connection
Connecting to AC Power
Insert the small end of the AC adapter
into the DC IN jack on the rear of the
unit. Insert the other end (with the 2
blades) into a conveniently located AC
outlet having 120V AC, 60Hz.
Note:
Make all connections before
connecting to AC power.
Inserting Batteries
1
Slide the battery door in the
direction the arrows to reveal
the battery compartment.
Insert eight (8) “C” size alkaline
batteries (not included) as
indicated on the diagram.
2
Replace cover tightly before
operating.
Battery Precautions
The precautions below should be followed when using
batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing
the batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g.
Alkaline and Carbon Zinc) or old batteries with fresh ones.
4. If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery
leakage.
5. Do not try to recharge batteries not intended to be
recharged, they can overheat and rupture (Follow battery
manufacturer’s directions).
6. Rechargeable batteries are to be removed from the product
before being charged.
7. Rechargeable batteries are only to be charged under adult
supervision.
8. Exhausted batteries are to be removed from the product.
9. Battery shall not be exposed to excessive heat such as
sunshine, fire or the like.
Disco Lights
1
To illuminate the disco light, press
the
DISCO LIGHTS
button to switch
it ON. Press it again to switch it off.
u
