— E4 —
Connection
Connecting the Microphone(s)
Connecting to AC Power
Insert a microphone’s plug into the Mic 1
jack
u
. Insert the other microphone’s plug
into the Mic 2 jack
v
(if desired).
Note:
Do not drop or tap the mic, as
damage to the mic or speakers may occur.
Do not spin the microphone around for the
same reason.
Insert the small end of the AC adapter
into the DC IN jack on the rear of the
unit. Insert the other end (with the
2 blades) into a conveniently located
AC outlet having 120V AC, 60Hz.
Notes:
• Only use the supplied AC adapter.
Failure to do so may cause a fire
or damage the unit.
• The AC adapter included with this unit is for its use only. Do not use it with other
equipment.
• Turn off the unit before unplugging the AC adapter from the unit to avoid damaging the
unit.
• When the unit is not going to be used for a long time, disconnect the AC adapter from
the AC outlet.
• If the unit acts erratically or malfunctions, unplug the unit, wait 20 seconds and plug it
back in.
• Never use an AC adapter that is damaged. Route power lead in a safe manner and make
sure it is not subjected to trapping or pinching. If the power lead is damaged, refer to a
qualified service agent.
u
v
