21
22
23
24
Carefully lower the glass panels back
into the wall channels and onto the
spacers.
Remember the 7mm gap at the front of
the hinge side panel and 14mm for the
handle side. (Step 11)
Screw the brackets to the walls. Evenly
�ghten the screws un�l the gaskets just
“nipping” the glass.
Tighten all glass screws to 15.6N.
DO NOT fit the cover plates.
A�ach the glass to glass "h" seal to the
hinge side fixed panel.
Check the orienta�on is correct.
A�ach the glass to glass hinges and
�ghten to the fixed panels. Evenly
�ghten the screws un�l the gaskets are
just “nipping” the glass.
Tighten all glass screws to 15.6N.
DO NOT fit the cover plates yet.
06/11
Glass Panel
Underframe
Shower Tray
Glass to Glass “h” Seal
Hinge side shown below
7mm
Glass Panel
Underframe
Shower Tray
VIEW 25
07/2019 V 2.2
