10/2021 V 1.1
VIEW 19.3H
07/16
Trim the Underframe profile using a
chop saw.
If necessary, trim the Wall Profile on
the opposite side of the archway and
repeat step 11 to pre drill the Wall
Profile.
Use a fine file to remove any burrs. Be
careful not to damage the channel
finish.
Remove all tape from the underside of
the Underframe. Carefully place the
Underframe back into posi�on. Ensure
that the trimmed end is bu�ed up
against the wall.
Place the Underframe Gasket back into
the Underframe. Trim excess Gasket.
To centre the Return Panel, add 1mm
Packers on both sides of the Return
Panel in the Underframe.
Reinstall the Wall Profiles and Wall
Profile So� Seals.
Add silicone in the corner where the
Wall profile Meets the Underframe at
the back.
Re-install the Glass.
Silicone the
inside corner
25
26
27
28
Silicone
