13
14
15
16
Carefully remove the channels and
trim using a fine toothed junior
hacksaw.
Use a fine file to remove any burrs.
Be careful not to damage the channel
finish.
Rea�ach the channels in their
previous posi�ons. This �me use the
adhesive tape for the base channel and
silicone sealant as indicated for the wall
channel.
Run a bead of silicone sealant down
the back face of the wall channel to
create a water �ght seal.
04/12
Once installed, run beads of silicone
sealant down the inside walls of the
wall channel as shown.
Do not run too larger beads or fill the
channel with silicone.
Using a 6mm high quality drill bit for a
clean and precise hole, drill the marked
areas and fully insert the wall plugs.
Professional Tip
If drilling ceramic tiles, place
masking tape on the tiles before
marking and drill through the
tape to prevent the drill bit from
skidding.
DO NOT use Hammer Action as
this will break the tiles.
Silicone
View 01
07/2019 V 2.2
