Owner's Manual
Entry Trim - con't
The entry trim utilizes a clutching mechanism that protects the handle from vandalism or forced entry. If the handle
has been forced into the clutch position one or both of the 1/8" dia x 1" rotation limiting pins, located below the
handle lock nut, may have to be replaced. This can be done by simply removing the trim from the door and replacing
the pins. When reattaching the trim make sure the trim spindle engages the device before tightening nuts.
You will find a detailed parts breakdown of the entry trim on the following page for your convenience. (Figure C).
The internal components of the trim are under extremely high pressure and should not be tampered with. The
warranty will be voided if the seal on back of the trim has been broken.
