Safety Precautions
When choosing a ramp, the length, and therefore
the angle of the ramp depend upon:
•
The height to be raised
•
The type of wheelchair or scooter
•
The weight of the wheelchair or scooter
and the user
•
The strength of the helper or user.
As a general guide, a minimum gradient of 1 in 6
is suggested, although 1 in 8 is recommended,
when the user is seated on the wheelchair or
scooter.
For loading an unmanned wheelchair or scooter
into a vehicle, a higher gradient can be used, but
this should not exceed 1 in 3.3 In addition to this, it
is important that you refer to your
vehicle’s user
guide for the proper degree of incline/decline and
direction before using the ramp.
- Never exceed its recommendations.
General Safety Warning
Please ensure these instructions are fully
read and implemented. Failure to do so
may result in injury to the user. Retain in a
safe place for future reference.
Intended Use
This Telescopic Channel Ramp, TRP207 is
designed to provide access for manual
wheelchair users* (and their carers, if
appropriate) over thresholds, steps and
curbs. The two part telescopic design is
easily adjusted to provide the desired length.
There are various available length versions in
the range, see table above for size
information
Unpacking
•
No tools are required to assemble this
product. (However if the ramp is to be
secured to the landing surface, then
appropriate tools will be required)
•
Remove items from packaging; Check for
damage. If you see any, or suspect a
fault, do not assemble or use the product;
contact your supplier immediately.
*Product weights are approximate and may vary
User Instructions
Telescopic Channel Ramp
TRP-207 Range
•
Only carry the ramp using the carry
handles. Take care when lifting; follow
standard manual handling procedures.
•
Take particular care when using the ramp
in wet/damp conditions.
•
*Ramp not suitable for powered
wheelchair and/or mobility scooters.
Product Code
SKU
Length
Minimum
Length
Maximum
Usable
Width
Overall
Width
Product weight
(pair of ramps)*
Maximum load
height
Capacity
TRP207-4
745mm
1220mm
150mm
190mm
5.2kg
200mm
275kg
TRP207-5
895mm
1520mm
150mm
190mm
7kg
250mm
275kg
TRP207-6
1050mm
1830mm
150mm
190mm
8.3kg
300mm
275kg
TRP207-7
1200mm
2130mm
150mm
190mm
8.7kg
350mm
275kg
