ä
4
Design Features
The ZeroView is made from printed circuit board (PCB). The thin and
rigid material is perfect for mounting the camera module to, and keeps
the size and cost down.
We’ve used genuine ‘Adams’ suction cups – the best available – to
ensure the ZeroView stays put for as long as you need.
The PCB has slide holes for the suction cups, meaning you can remove
the board from the suction cups without removing the cups from the
window.
Spacers have been used to mount your Pi to the ZeroView whilst
allowing the camera cable to tuck underneath out of sight.
The Pi is mounted in a way that allows you to fit HATs and add-on boards
to further enhance your projects.
All fixings have been provided for your camera module, and are
assembled in a way that avoids bending the camera module board.
The board is designed so that the camera module lens sits close to the
glass, avoiding as much glare and reflections as possible.
We’ve chosen a white PCB to compliment the most common window
colours whilst also giving a ‘nod to the clouds’!
Toolless assembly makes the ZeroView perfect for all ages and abilities.