1
2
The Land of Nod
8135 River Drive • Morton Grove, IL 60053 • p: (800) 933-9904 • e: [email protected] • www.landofnod.com
Taylor Crib
Assembly Instructions
Page 3 of 5
Made in Vietnam - r03
Carefully fit pre-attached dowels of 2
side panels
into corresponding holes of
end panel
as shown. Using a
small Allen
wrench
, loosely attach bottom corners with 1
large bolt
, 1
spring washer
, 1
flat washer
and 1
half-moon bracket
per side
panel as shown. Using a
small Allen wrench
, loosely attach top corners with 1
small bolt
, 1
spring washer
and 1
flat
washer
per side panel as shown.
Do not fully tighten bolts until further instructions.
Fit pre-attached dowel of
crossbar
into corresponding hole of
end panel
as shown. Using a
small Allen wrench
,
loosely attach with 1
large bolt
, 1
spring washer
, 1
flat washer
and 1
half-moon bracket
as shown.
Do not fully tighten
bolts until further instructions.
NOTE: Spring washers and
flat washers are pre-attached
to corresponding bolts
NOTE: Spring washers and
flat washers are pre-attached
to corresponding bolts
