The Identifier ID3200, User Manual

Page: 9 / 12

-17-
ID3200
DOWNLOAD INSTRUCTIONS
ALREADY LOADED TERMINAL
Follow these instructions to perform a new download on
The Identifier ID3200.
1. Plug a phone line into the second telephone jack
from the left looking at the back of the ID3200.
2. Depress the key below “ID MENU” on the
ID3200.
3. Depress the key below “EDIT”.
4. The ID3200 will prompt you for a password.
Enter the default password ‘111111’ or the new
password if it has been changed, followed by the
ENTER key.
5. The following menu items will appear across the
bottom of the display screen:
EDIT XMIT DIAGS MORE. Depress the purple
key under “MORE”.
6. The following items will now be displayed across
the bottom of the display screen:
-18-
PROGRAM MORE
DOWNLOAD
7. Depress the purple key under “PROGRAM
DOWNLOAD”.
8. The following will be appear on the display
screen:
PROGRAM DOWNLOAD?
YES NO
To initiate a program download, depress the
purple key. below “YES”. To cancel the
operation, depress the purple key under “NO”.
9. The ID3200 will now dial The Identifier
download PC and perform the program download.
If “NO LINE” is displayed, it means that a) there
is no dial tone on the line that is connected to The
Identifier, b) The telephone line is connected to
the wrong telephone jack on the back of The
Identifier (see step #1), or c) Either the wall
connection or The Identifier connection of the
telephone line is not secure. When the problem is
corrected return to step #1 and try again. If the
connection is correct and there is a dial tone, The
Identifier will display “DIALING” and a phone
number. When it is connected to the download
PC, the top line of The Identifier will be filled
with ten dashes. Each dash will successively
change to an asterisk from left to right as the
download progresses. When completed, the
ID3200 will display, “DOWNLOAD DONE CP”.