The Identifier ID3200, User Manual

Page: 8 / 12

-15-
6. When all three parameters have been loaded, the
terminal will prompt for “FULL or PARTIAL”.
Depress the [ENTER] key and the terminal will
dial the download PC and perform the download.
7. The display shows the progress of the download
by initially displaying 10 dashes and changing
each dash from left to right into an asterisk as
successive 10% increments of the download are
completed.
8. “DOWNLOAD DONE CP” will be displayed
upon completion of the download.
9. Depress the [CLEAR] key until the message
“CODE = xxxx” appears.
10. Call the main office for the appropriate passcode.
** - To enter alphabetic characters on The Identifier,
follow these steps:
1. Find the key with the alphabetic character you
want. Depress that key.
2. Depress the [alpha] key until the character is
displayed.
Example: To enter FOX , the following sequence
would be used:
[3][alpha][alpha][alpha] ( for the ‘F’)
[6][alpha][alpha][alpha] (for the ‘O’)
[9][alpha][alpha] (for the ‘X’)
If The Identifier does not prompt you for *ZT,*ZP and
*ZA, while following the above instructions, perform
the following steps:
-16-
1. Depress the [clear] key until the display is back to
SYSTEM = xxxxxxxx.
2. Depress the [7] key twice. “Recall what” will be
displayed
3. Enter [*][Z][T][enter]. “*ZT = xxxx” will be
displayed.
4. Depress the backspace key. “*ZT=” will be
displayed.
5. Enter the terminal id followed by the [enter] key.
6. Depress the [clear] key. “Recall what” will be
displayed.
7. Enter [*][Z][P][enter]. “*ZP = xxxx” will be
displayed.
8. Depress the backspace key. “*ZP=” will be
displayed.
9. Enter the download phone # followed by the
[enter] key.
10. Depress the [clear] key. “Recall what” will be
displayed.
11. Enter [*][Z][A][enter]. “*ZA = xxxx” will be
displayed.
12. Depress the backspace key. “*ZA=” will be
displayed.
13. Enter the application name followed by the [enter]
key.
14. Depress the [clear] key until the “SYSTEM =
xxxxxxxx” message is displayed
15. Depress the [0] key followed by the [enter] key
and the dial out will begin.