The Handy THSGR, Instruction Manual, Page: 7 / 15

ASSEMBLY

Attach the Upper Handle (1) to the two Lower Handles (2), using the 2x Bolt M6x70mm (7), Flat
Washer (5) & Nut (6). Do not fully tighten.

Attach the Scraper Bar (3) to the Handle assembly using 2x Bolt M6x30mm (11), Flat Washer (5)
& Nut (6). Do not fully tighten.

Place the Handle assembly over the Drum (4) spindles and secure with the 2x Circlips (9), using
the groove within the spindle.

Now fully tighten the previously assembled Handle and Scraper Bar Nuts & Bolts.

Your Roller should now be ready to use.