STAY ALERT
Do not operate the machine while under the influence of drugs, alcohol, or any medication that
could affect your ability to use it properly. Do not use this machine when you are tired or distracted
from the job at hand. Be aware of what you are doing at all times. Use common sense.
AVOID DANGEROUS CONDITIONS
Make sure there is adequate surrounding workspace. Cluttered areas invite injuries. Keep your work
area clean with sufficient light. Keep the area around the machine clear of obstructions, grease, oil,
rubbish and other debris which could cause persons to fall onto moving parts.
INSPECT YOUR MACHINE
Check all bolts, nuts, and screws for tightness before each use, especially those securing guards and
drive mechanisms. Vibration during use, may cause these to loosen. Form a habit of checking to see
that all other tools/equipment are removed from the working area before using. Replace damaged,
missing or failed parts before using it. Warning labels carry important information. Replace any
missing or damaged warning labels.
DRESS PROPERLY
Do not wear loose clothing, gloves, scarfs, neckties or jewelry (rings, wrist watches), which can be
caught in moving parts. Protective electrically non-conductive gloves and non-skid heavy duty
footwear are highly recommended when working. Wear protective hair covering to contain long
hair, preventing it from getting caught in machinery.
KEEP BYSTANDERS AND CHILDREN AWAY
Keep unauthorised persons away from the machine.
If approached, stop the machine immediately.
Do not allow children to handle or climb on the machine.
DO NOT OVERREACH
Keep proper footing and balance at all times when using the machine. Never stand on the
machine. Serious injury could occur if the machine is tipped or if the moving parts are
unintentionally contacted. Do not store anything above or near the machine, where anyone might
stand on the machine to reach them.
AVOID INJURY FROM UNEXPECTED ACCIDENT
Keep hands & feet out of the way of all moving parts. Do not place any part of your body or any
tool e.g. in the machine during operation.
DO NOT FORCE TOOL
Always work within the rated capacity. Do not use for a purpose for which it was not intended.
NEVER LEAVE MACHINE UNATTENDED
Do not leave the machine unattended until it has come to a complete stop.
FILLING THE DRUM - WATER
When filling the drum with water, do not connect a hose pipe via a fixed coupling, which could cause
a build-up of pressure within the drum. Always empty the roller drum after you have finished using
it, in order to prevent it from rusting and also protect from sub-zero temperatures. Anti-freeze can
be used for further protection.
FILLING THE DRUM – SAND
When filling the drum with sand, it is recommended a large funnel is used to ease the filling method.
MAINTAIN YOUR MACHINE WITH CARE
Clean the machine immediately after use. Keep the machine clean to ensure it operates to its full &
safest performance. When maintaining this machine, only the manufacturer’s original replacement
parts should be used. The use of non-original manufacturer parts may invalidate your warranty.
PROTECT THE ENVIRONMENT
Take left over materials to an authorised collection point or follow the stipulations in the country
where the mixer is used. Do not discharge into drains, soil or water.
STORE IDLE EQUIPMENT
When not in use, the machine should be stored in a dry location. Keep the machine away from
children and others not qualified to use it.
Summary of Contents for THSGR
Page 14: ......