2
2. Remove and identify loose parts from carton and bag.
1. HELPFUL
HINTS:
READ THE INSTRUCTIONS BEFORE ASSEMBLY
z
If your spreader does not spread evenly, be sure the FRONT of the gear box points to the
front of the spreader. The impeller must turn clockwise. Reversing the gear box will cause
the impeller to turn counter clockwise. Clean the impeller plate after each use. Fertilizer
stuck on the impeller blades will cause uneven spreading.
z
Your spreader is designed to be pushed at three miles per hour, which is a brisk walking
speed. Slower or faster speeds will change the spread patterns. Wet fertilizer will also
change the spread pattern and flow rate. Clean your spreader thoroughly after each use.
Wash between the shut off plate and bottom of the hopper.
z
Gears are permanently lubricated at the factory. Do not open the gear box or dirt may
enter.
Summary of Contents for THS80
Page 12: ...12 PARTS DRAWING ...
Page 15: ...15 ...
