SPECIFICATIONS
The manufacturer reserves the right to change the product specification and livery according to continued
product improvements.
Model
THS50
Product Number
193848002
Weight
10.3kg
Capacity (Weight)
23kg
Wheel Diameter
176mm
Tyre
Pneumatic - 4.10/3.50-6
Tyre Rating
2 Ply
Tyre Maximum PSI
25psi (Do not exceed)
IMPORTANT INFORMATION
INTENDED USE
The product is intended for spreading granular material for domestic gardens.
Ideal for fertiliser, granules,
grass seed etc. This product can be used with refined ice melting salt, but please clean the spreader thoroughly
after use with refined de-icing salt. Please note that this product cannot be used with Rock Salt.
This product is not intended for commercial use.
Generally acknowledged accident prevention regulations and enclosed safety instructions must be observed.
Only perform work described in these instructions for use, any other use is incorrect. The manufacturer will
not assume responsibility for damage resulting from such use.
GENERAL SAFETY INSTRUCTIONS
It is important that you read and understand the owner’s manual and labels affixed to the
machine. Learn its
application and limitations as well as the specific potential hazards. Retain these instructions for future
reference. The operator is responsible for following the warnings & instructions in this manual and on the
product.
STAY ALERT
Do not operate the machine while under the influence of drugs, alcohol, or any medication that could affect
your ability to use it properly. Do not use this machine when you are tired or distracted from the job at hand.
Be aware of what you are doing at all times. Use common sense.
AVOID DANGEROUS CONDITIONS
Make sure there is adequate surrounding workspace. Cluttered areas invite injuries.
Keep your work area clean with sufficient light. Keep the area around the machine clear of obstructions,
grease, oil, rubbish & other debris which could cause persons to fall onto moving parts.
INSPECT YOUR MACHINE
Check all bolts, nuts & screws for tightness before each use, especially those securing guards & drive
mechanisms. Vibration during use, may cause these to loosen.
Replace damaged, missing or failed parts before using.
Warning labels carry important information. Replace any missing or damaged warning labels.
CRUSH AND CUT HAZARDS
Always keep your hands and feet clear from moving parts while operating the equipment.
Always keep the work area clean and clear when operating.
CONDITIONS
We recommend the machine is not used during winds. This may affect the spreading pattern.
