Page 9
OPERATION, cont’d
To operate:
•
Place a log on the
Do not
attempt to split a log at an angle and do
not
place
the log across the splitter - always split in the direction of
the grain.
•
Adjust the Log Holders (A) to suit the diameter of the log.
•
Hold the log closely with the clamping brackets in the
control lever guards.
•
Lower levers to start splitting.
•
Releasing either of the levers stops the motion. Releasing
both levers returns the splitting wedge to the upper
position.
Hints and Tips:
•
Never attempt to load the log splitter whilst the ram is in
motion.
•
Never try to split two logs at once.
•
Keep your hands away from the splits and cracks which
appear whil
e
the log is being split.
•
Do not remove jammed logs with your hands - stop the
engine and loosen the log with a downward strike on the
log with a hammer.
•
Do not force the tool and do not make alterations to the
log splitter as this could be dangerous and invalidate your
warranty.
•
Do not try to split logs larger than recommended in the
•
After long periods of operation the splitting wedge may
•
Check the level of the hydraulic oil regularly using the
dipstick. In addition the oil should be changed once a
year.
Recommended oils are:
SHELL Tellus 22
MOBIL DTE 11
ARAL Vitam GF22
BP Energol HLP-HM 22
