The Handy THLS-6-PLUS, Operators Manual & Partslist

Page: 4 / 24

SPECIFICATIONS
The manufacturer reserves the right to change the product specification and livery according to
continued product improvements.
Model Number THLS-6
Product Number 193893001
Motor
230V~ 50Hz 2200W S6 (40%)
IP54
Splitting Force 6 Ton
Forward Speed 3.4cm/s
Retract Speed 5.1cm/s
Hydraulic Pressure 20Mpa
Hydraulic Oil Tank Capacity 3.5L
Overall Size (mm) (L)940 – (W)270 – (H)510
Stroke Length (mm) 370
Log Capacity Diameter (mm)* Min 50 – 250 Max
Log Capacity Length (mm) Min 160 – 520 Max
Weight (kg) 45
* The diameter of the log is not the only factor that determines how easy it will be to split. A small
log can be difficult to split when it has knots or is a particularly hard wood.
IMPORTANT INFORMATION
HYDRAULIC OIL
This machine is supplied with Hydraulic oil from the factory, to allow the machine to be used straight from
the carton. Do check the oil level (instructions available in the manual) prior to the first use and
periodically thereafter.
ELECTRICAL REQUIREMENTS
Connect the main leads to a standard 230V+10% (50Hz+1Hz) electrical supply which has protection
devices for under-voltage, over-voltage, over-current as well as a residual current device (RCD) with
maximum residual current rated at 0.03A.
EXTENSIONS LEADS
Improper use of extension leads may cause inefficient operation of the log splitter which can result in
overheating. Be sure the extension lead is no longer than 10m and its cross-section is no less than 2.5mm²
to allow sufficient current flow to the motor. Avoid use of loose or inadequately insulated connections.
Connections must be made with a protected material suitable for outdoor use.
WORKING CONDITIONS
This log splitter is a domestic use model. It is designed for operating under ambient temperatures between
+5oC and 40oC and for installation at altitudes no more than 1000m above M.S.L. The surrounding
humidity should be less than 50% at 40oC. It can be stored or transported under ambient temperatures
between -25oC and 55oC.
INSPECT YOUR LOG
Make sure there are no nails or foreign objects in logs to be split. The ends of the logs must be cut
square. Branches must be cut off entirely so that the trunk is relatively smooth.