background image

 
 

 

STAY ALERT  

  

Do not operate the machine while under the influence of drugs, alcohol, or any medication that could affect 
your ability to use it properly. Do not use this machine when you are tired or distracted from the job at hand. 
Be aware of what you are doing at all times. Use common sense. 

AVOID DANGEROUS CONDITIONS  

 

Always operate your logsplitter on dry, solid, level ground. Never operate your logsplitter on slippery, wet, 
muddy, or icy surfaces. The location you choose should be free from any tall grass, brush, or other 
interferences. There should be plenty of room for handling, and help the operator stay alert. Keep your work 
area clean and well light. Cluttered areas invite injuries. To avoid tripping, do not leave tools, logs, or other 
components laying around the work area. Do not use the logsplitter in wet or damp areas or expose it to rain. 
Do not use it in areas where fumes from paint, solvents or flammable liquids pose a potential hazard.  

INSPECT YOUR MACHINE    

Check your logsplitter before turning it on. Keep guards in place and in working order. Form a habit of checking 
tools are removed from the working area before turning it on. Replace damaged, missing or failed parts before 
operating the machine. 

DRESS PROPERLY

 

Do not wear loose clothing, gloves, neckties or jewellery (rings, wrist watches). They can be caught in moving 
parts. Protective electrically non-conductive gloves and non-skid footwear are recommended when working. 
Wear protective hair covering to contain long hair, preventing it from get caught in machinery. 

PROTECT EYES & FACE 

Any logsplitter may throw foreign objects into the eyes. This can cause permanent eye damage. Always wear 
safety goggles. Everyday eye-glasses have only impact resistant lenses. They are not safety glasses. 

AVOID ELECTRICAL SHOCK  

 

 

Check that the electric circuit is adequately protected and that it corresponds with the power, voltage and 
frequency of the motor. Check that there is a ground connection and a regulation differential switch upstream. 
Ground the logsplitter. Prevent body contact with grounded surfaces: pipes, radiators, ranges, and refrigerator 
enclosures.  
Never open the pushbutton box on the motor. Should this be necessary, contact a qualified electrician. Make 
sure your fingers do not touch the plug's metal prongs when plugging or unplugging the logsplitter. 
After installation, the degree of protection of the BSI and the SEV approved plug and socket combination shall 
be IP44D at least. Avoid excessive bending and twisting of the connection between the power cord of the 
British plug and the junction box. 

KEEP BYSTANDERS AND CHILDREN AWAY  

 

The logsplitter must be always operated by one person only. Other people should keep a safe distance from 
the work area (10 metres recommended), especially when the logsplitter is under operation. Never use 
another person to help you with freeing a jammed log. 

INSPECT YOUR LOG 

Make sure there are no nails or foreign objects in logs to be split. The ends of the logs must be cut square. 
Branches must be cut flush with the trunk. 

DO NOT OVERREACH 

Operating floor must not be slippery. Always keep proper footing and balance. Never stand on the logsplitter. 
Serious injury could occur if the tool is tipped or if the cutting tool is unintentionally contacted. Do not store 
anything above or near the logsplitter where anyone might stand on the tool to reach them. 

AVOID INJURY FROM UNEXPECTED ACCIDENT  

 

Always pay full attention to the movement of the log-pusher. Do not attempt to load the log on until the log-
pusher has stopped. Keep hands out of the way of all moving parts. 

PROTECT YOUR HANDS 

Keep your hands away from splits and cracks which open in the log; They may close suddenly and crush or 
amputate your hands. Do not remove jammed logs with your hands

DO NOT FORCE TOOL  

 

It will do a better and safer job at its design rate. Never try to split logs larger than those indicated in the 
specifications table. This could be dangerous and may damage the machine. Don't use the logsplitter for a 
purpose for which it was not intended. 

NEVER LEAVE MACHINE RUNNING UNATTENDED    

Do not leave the machine unattended, until it has come to a complete stop and the power removed from the 
electrical source. 

 

Summary of Contents for 1938182001





























Reviews: