STEP 5
Place the Bag/Cover over the Handle and side down to cover your logs. Secure by fastening the
Velcro strips.
OPERATION
WARNING!
Before operating the product, ensure that the wheels are secured correctly and all nuts and bolts are
fully tightened. The product should also be undamaged.
WARNING!
CAUTION: DO NOT overload the truck.
Do not exceed the Maximum Load Capacity of 100kgs.
DO NOT attempt to carry loads which make the truck unstable
•
Place the load on the toe plate (ensure the General Safety Instructions are followed).
•
Once you’re happy the load is in
position, take a moment to think about the area you will be
passing with the truck, to ensure no trip hazards or obstacles are in the way.
•
Slowly lean the truck backwards to take the weight of the load, ensuring your feet are shoulder
width apart and one foot is slightly in front of the other, to assist with your balance.
•
Proceed pushing the truck at a safe speed, especially at corners where the load could shift.
•
On inclines and slopes, extra care should be taken.
•
Always use a ramp for steps and curbs.
MAINTENANCE & STORAGE
WARNING
Improper maintenance & storage of the machine may void your warranty. Keep the machine clean
for better and safer performance.
MAINTENANCE
•
Before each use, check all nuts & bolts to be sure they are sufficiently tightened.
•
Keep all moving parts lightly greased/oiled, using multi-purpose grease or maintenance spray.
•
We recommend only manufacturer original parts are used when maintaining this machine.
Failure to do so could invalidate your manufacturer’s warranty.
