Denotes special Safety Cautions Warning. Read entire manual to comply with all
Safety & Service Precautions.
POWER SUPPLY
WARNING: THIS LIFT IS EQUIPPED WITH A 3-PRONG PLUG WHICH MUST BE PLUGGED INTO A GROUNDED
115 VOLT, 60 HZ. POWER SUPPLY FOR YOUR SAFETY. REMOVING GROUND PLUG PRONG FROM PLUG OR
FAILURE TO PLUG INTO A GROUNDED RECEPTACLE MAY RESULT IN FATAL ELECTRICAL SHOCK.
AUXILIARY CENTER TABLE PLATE
The Electric Multi-Lift Table comes with the center pan installed. The center pan can be taken off by removing the bolts.
Store in a convent location for later use.
LOADING AND LIFTING PUSH STYLE LAWNMOWERS
WARNING: NEVER OPERATE (START ENGINE) ON ANY EQUIPMENT WHILE IT IS LOADED ON THE MULTI-
LIFT.
1. Make certain the wheel guide channel is firmly bolted to the same side of the lift table as the tracking wheels of the lawn
mower. (Note: Some lawnmowers have offset wheels on one side to
compensate
for grass discharge chute). The
wheel channels are secured with two 1/4” bolts.
2. Utilizing the fixed ramp, load the lawnmower onto the Multi-Lift table.
3.
Utilizing the two tie-down straps provided with the Multi-Lift, secure the mower to the table. top. Do not leave any slack.
WARNING: FAILURE TO FULLY SECURE THE ITEM YOU ARE LIFTING COULD RESULT IN INJURY.
PARTICULARLY IF YOU INTEND TO ROTATE THE LIFT TABLE.
4. After securing lawnmower move to the front (motor side) of the lift. Making certain that all pinch points are free from
hands and legs and that all body parts are clear from protruding obstacle (i.e. handles, mufflers etc.)
LIFT TABLE ROTATION
WARNING: ROTATING AN ITEM WITH LIQUIDS (GAS, OIL ETC.) CAN CAUSE SPILLAGE. MAKE CERTAIN
HAZARDOUS MATERIALS ARE DRAINED BEFORE ATTEMPTING TO ROTATE. ALSO DOUBLE CHECK TIE-DOWN
STRAPS. ALWAYS BE AWARE OF PROTRUDING PARTS (HANDLES, MUFFLERS ETC). MAKE CERTAIN THE
AREA IS CLEAR OF ANYONE WHO COULD GET INJURED DURING ROTATION OR ANY OTHER TIME WHILE THE
EQUIPMENT IS LOADED.
1. With one hand, firmly grip the front end of the lift table (square tubing). You may rotate the table either way.
2. With the other hand, pull the T-Head release pin at the swivel head.
3. Rotate the table to the desired location. There are two points each direction. One at 45 degrees and the other at 90
degrees. Make certain the T-Head pin is secured in a hole on the swivel head before releasing the lift table.
4. To return the lift table to the level position, reverse above instructions.
TO LOWER LIFT
1. Make certain the area is clear of anyone who could get injured.
2. Hold in the down push button switch until lift is at the desired height or until it reaches ground level.
3. There is a limit switch which will automatically stop the downward motion of the lift table when ground level is reached,
when the lift is at a level position. However, caution must be taken when the platform is rotated to a 45 or 90 degree
angle, the switch does not activate when the platform reaches the floor.
LOADING OTHER EQUIPMENT
The Handy Multi-Lift is most specifically designed for use with push style lawnmowers. It, however can be utilized for a
multitude of different items that need to be lifted. Always make certain that whatever items is being lifted can be safely
loaded, secured and unloaded before attempting to lift with this equipment.
