Fitting a new plug
If for any reason you need to fit a new plug, the flexible mains lead
must be connected as shown below. The wires in the mains lead fitted
to this appliance are coloured in accordance with the following code:
Brown wire = Live (L)
Blue wire = Neutral (N)
Green & Yellow = Earth (E)
If colours of the wires in the mains lead of this appliance do not
correspond with the coloured marking identifying the terminals in your
plug, proceed as follows:The wire which is coloured Blue must be
connected to the terminal which is marked with the letter N or
coloured Black. The wire which is coloured Brown must be connected
to the terminal which is marked with the letter L or coloured Red. The
wire which is coloured Green & Yellow must be connected to the
terminal which is marked with the letter E or coloured Green.Before
refitting the plug cover check that there are no cut or stray strands of
wire inside the plug. Use a 13 Amp BS 1362 fuse, only BSI or ASTA
approved fuses should be used. If you are in any way unsure which
plug or fuse to use, always refer to a qualified electrician.
Note: After replacing or changing a fuse on a moulded plug which has
a fuse cover, the cover must be refitted to the plug, the appliance
must not be used without a fuse cover.
Technical Data
Voltage
:
230V AC 50Hz
Rated power
:
1500 W
Model : SDA 1083
Connect Green
& Yellow to
Earth (E)
Connect
Brown to
Live (L)
Connect
Blue to
Neutral (N)
Ensure the outer sheath
is securely held by the
cord clamp
Summary of Contents for Ceramic Health Grill
Page 1: ......
