3
Rough-In Installation
Step 1
Step 2
Step 5
M
AX
MIN
Wrap the 1/2” inlet with Teflon tape.
Note: Wrap in the direction of the threads fully 2-3 times.
Leave inlet housing cover in
place until Pot Filler is installed.
Thread the housing onto 1/2” inlet.
Rough-in should only be installed
where the inlet connects on the left
or right. Never install with the inlet
opening on the inlet housing pointed
upward or downward.
1/2” INLET
1/2”
INLET
Wall/Tile
opening is
a minimum
1-3/8” and
maximum
1-3/4”
Note:
1/2” inlet threading not provided.
Step 4
M
AX
MIN
Use the minimum and maximum marks on the inlet housing cover to
ensure proper position of the inlet housing once installed.
Note: Secure the mounting bracket to wall stud.
Note:
Ensure minimum and maximum lines on inlet housing cover are
properly positioned before mounting, taking into account the depth
of the sheet rock and any backsplash. Maximum line will need to be
visible once backsplash is installed to ensure proper installation.
Step 3
Ensure mounting bracket is oriented properly
and level along the vertical scale shown below.
M
AX
MIN
MAX
MIN
INLET
