1
1
1
Before You Begin Installation
Inspect The Galley Pot Filler Tap for any damage prior to installation. Please refer to all local plumbing and building
codes prior to installation.
INSTALLATION WARNING
1.
Turn off the water supply lines.
2. Observe all local plumbing codes.
3. Inspect water supplies for signs of damage. Replace if necessary.
4. Flush supply lines thoroughly before installation.
5. DO NOT use petroleum-based products on this pot filler.
Package Contents
Tools
10 MM ALLEN KEY
Remove all contents from the package and
identify before installation.
1 - Pot Filler Tap
2 - Pot Filler Trim
Remove all contents from the package
and identify before installation.
1 - Mounting Bracket
2 - Screws
3 - Inlet Housing
4 - Inlet Housing Cover
Operating Pressure: 145 PSI max (10 bar)
Recommended Operating Pressure: 14 - 60
PSI (1-4 bar)
Flow Rate: 4.2 GPM / 60 PSI
Product is Certified to NSF 61/ANSI 372 and conforms with
the lead content requirements for lead free plumbing as
defined by California, Vermont, Maryland, and Louisiana
state laws and the U.S. Safe Drinking Water Act. This
faucet complies with ASME 112.18.1-2018/CSA B125.1-2018
requirements.
1
2
TECHNICAL INFORMATION
CARE & MAINTENANCE
Matte and Polished Stainless steel
In order to preserve the finish of your product, we recommend regular cleaning with a
soft wet cloth. For regular cleaning it is not necessary to use detergents. In case of need,
we recommend the use of a mild detergent or even better, a specific stainless steel
detergent. In this case, please follow the specific instructions of the detergent manufacturer.
When using a detergent rinse well with water immediately after cleaning, until all detergent is
removed from the surface. Dry with a soft cloth.
PVD finishes (Black Steel / Titanium / Rose Gold / Gold)
PVD technology is used to create a smooth, resistant and long lasting finish. A soft wet
cloth is sufficient for daily cleaning.
For resistant stains and fingerprints we recommend the use of a diluted mild soap and
water solution to be applied using a soft cloth. Rinse thoroughly after cleaning. In order
to avoid water stains we recommend to dry the surface with a soft cloth.
As it is not a coating but the result of a chemical reaction, a characteristic of PVD is that
objects of different shapes and dimensions can absorb color differently, resulting in slight
color variations. These are not to be considered defects.
All finishes:
DO NOT use bleach, caustic, ammonia or acid based cleaning materials or detergents
containing chloride, or any other strong household cleaning products, even if organic.
Even vapors of such products could damage the chemical balance of the stainless steel
surface. When using strong chemical products in the room, we recommend to air it out.
DO NOT use abrasive materials, cleaning pads, scouring sponges, files or other hard objects.
DO NOT use oily rags or greasy cloths when wiping the product surface.
Cleaning the aerator
Depending on the hardness and quality of water in your household, the aerator may
become clogged. We recommend to clean the aerator the first time a few days after the
installation, then every six to twelve months depending on the water quality.
To clean the aerator proceed by thoroughly rinsing it under running water until all debris
is removed. In case of persistent limescale or debris, we recommend to immerse the
aerator for several hours in a water and vinegar solution, or in anti-limescale solution.
Outdoor installation
Marine grade stainless steel is ideal for outdoor installation and it is extremely resistant
to oxidation. Nevertheless, it is not oxidation proof or stain proof.
In order to maintain the long lasting beauty of the stainless steel surface it is necessary
to regularly clean it. This is particularly important in marine environment where saline
deposits over time will affect the surface and cause oxidation. In such conditions the
surface must be cleaned more frequently in order to be preserved.
Spare parts
PHILLIPS SCREWDRIVER
TEFLON TAPE
LEVEL
4
3
2
1
ROUGH-IN
IDEAL POT FILLER
