IMPORTANT
If you are joining two or more cabinets together to house the
Galley Workstation you will need to trim the
bulkheads to create an 11" clearance.
Unlike typical undermount kitchen sink installations, The Galley Workstation is installed in the cabinet prior to the counter being
templated.
A support structure, (cleat system of wood frame), will need to be constructed and mounted inside the base
cabinet(s) and recessed 1/16" from the top.
The Workstation and Tap require a
minimum
of 22 1/2” inside the cabinet. For 24” deep inset cabinets installed against a wall the
cabinet must be pulled 1” away from the wall.
Leave the installation instructions tray affixed to the Workstation flanges until countertop has been installed.
Inspect The Galley Workstation for any damage prior to installation. For any questions or concerns please contact us immediately
at 800.375.4255 or [email protected].
Please refer to all local plumbing and building codes prior to installation.
Before You Begin
Tools
DRILL
CIRCULAR SAW
LEVEL
TAPE
MEASURE
SCREWS
(4) 1" X 6"
HARDWOOD BOARDS
(OR ANY SIZE A CARPENTER DEEMS
TO BE MOST EFFECTIVE)
5
