8
To Use (continued)
Replacing Batteries
Parent Unit(s):
If Power indicator on the Parent Unit(s) glows red
instead of blue when unit is turned on, batteries
are low.
If indicator does not light at all, batteries are
dead. Replace batteries following instructions
under “To Set Up-Parent Unit(s) p.5”.
Care
To Clean:
Do not immerse the parent unit(s) or the child
unit in water. Do not use cleaning spray or liquid
cleaners.
1. Unplug the child and parent unit(s) if they are
connected to a power source.
2. Clean the child and parent unit(s) with a
damp cloth. Make sure they are dry before
re-connecting them to a power source.
3. Unplug the adaptors and clean them with a dry
cloth.
4. Dispose of used batteries in an environmentally
friendly manner.
Storage
When you are not going to use your True Choice
™
monitor for some time, remove the alkaline
batteries from the parent unit(s). Store in a clean,
dry place.
WARNING:
Keep batteries away from children. Parents are urged to exercise care in the storage,
use and disposal of all batteries. Do not dispose of batteries in a fire. They may explode.
To avoid battery leakage:
9
Be sure to insert batteries correctly following instructions. Do not put batteries in backwards;
positive (+) and negative (–) ends must face the proper direction.
9
Do not mix old and new batteries.
9
Do not mix alkaline, standard(carbon-zinc), or rechargeable(nickel-cadmium) batteries.
9
Always remove exhausted batteries from the product.
9
Never use a screwdriver or any other tool to pry batteries from the compartment, as the supply terminals
may be short-circuited.
9
Do not leave batteries in the monitor for long periods of non-use.
Failure to follow these instructions may cause batteries to make “popping” sounds and leak battery acid,
which could result in personal injury and damage to the monitor. If battery leakage occurs, avoid all contact
with battery acid, being especially careful to keep it away from eyes and mouth. Should contact occur, wash
any affected skin and clothing thoroughly.
