6
REMOVE BOTTLE ASSEMBLY
1) Remove bottle assembly by pushing the
release buttons
2) Remove hose connectors from 3-way adapter
3) Remove shields, adapters, and valves
for cleaning.
IMPORTANT: Place Flexi-Fit™
shields in this drying position
to prevent warping.
BREAST PUMP CARE
Clean all parts prior to initial usage and after each use.
Clean all parts prior to initial usage and after each use.
IMPORTANT: Do not sterilize any part of the breast pump in the microwave unless using
a product
1) Always separate the 3-wayadapter from breast shield before cleaning.
2) For miPump – Double Deluxe, always separate the optional bottle adapters from bottles.
3) After cleaning the valve, gently lift the end of the soft rubber piece (the end with the raised
If the end is stuck to the valve, wash valve again in warm soapy water. DO NOT PRESS OR PULL
HARD ON THE FLEXIBLE FLAPPER END. DAMAGE CAN OCCUR IF THE FLAPPER TEARS.
4) Make sure Y Connector plug is in place, closing the opening.
5) W ipe hose clean with clean, damp cloth.
Cleaning
Flexi-Fit™
3-way
Valves
Bottle
Tote
Pump
Pump
Pump
Hose
Guide
Shields
Adapter
Parts
Bag
Cradle
Handle
Surface
Wipe Only
Warm Water/
mild liquid soap
Top Rack
Dishwasher-safe
(2-5 min)
**Boil-Safe
**Sterilizer
(use as instructed)
**Harmless color change possible. Allow all parts to cool before reassembling.
TO STORE:
Make sure the pump and all components are completely dry before placing in tote
bag. If you have installed batteries, remove them prior to storing the pump for a prolonged time
period.
If Using Pump Handle
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
�
