Section 7 - Installation and Use
1
2 -
Remove
BOTH
LATCH Lower
Anchor connector from the LATCH
Lower Anchor storage clips.
3-
Attach the right and left LATCH
Lower Anchor to the anchor points.
Press down on the base with your
knee and pull up on the webbing loop
until the webbing is taut.
4-
CHECK
level indicator on I480 by
installing on base to ensure the
ball is in the green area.
.
CHECK
base for movement
at the belt path. Base should
not move more than 1 inch in
any direction.
5
-
.
Consult your automobile’s owners
manual or manufacturer for location
and availability of LATCH lower
anchor points.
CRS Connector LATCH Anchor
Points- 7.3
Alternate Storage
.
21
If base moves, repeat steps
until all safety steps are met.
Rear of Vehicle
