IMPORTANT SAFEGUARDS
INVALID SELECTIONS
If the selections are not valid the SmartWarmer beeps 3 times and the control
panel center light will flash red continuously until a correction is made. The
selected icons that are incorrect will flash orange continuously. Correct the
icon selection and
press the ON button.
MISSING SELECTION
If a selection is not made in all 4 quadrants the SmartWarmer beeps 3 times,
the control panel center light flashes red continuously, and all icons in the
unselected quadrant will flash orange continuously. Press the selection
button to choose the correct icon in the missing quadrant. The center control
panel light turns green.
Press the ON button.
INCORRECT SELECTION
If after the SmartWarmer is on and you find that a selection is incorrect press
the ON button to shut off the unit. The SmartWarmer will beep once and the
center control panel light will flash red and remain lit until reset. Make the
correct selections and press the ON botton. The center control panel light will
flash green during the warming cycle.
WARMING CYCLE COMPLETE
When warming is complete the SmartWarmer will beep 3 seconds and the
center control panel light will be lit orange continuously.
TURN OFF SMARTWARMER
Press the ON button. All lights will shut off and SmartWarmer will beep once.
TURN ON SMARTWARMER
Press any button
and the SmartWarmer will reset to previous selections. If
the previous selections are the same as the bottle being warmed press ON
button. If a selection change is required press the selection buttons to
change the setting and then press ON button.
FAILED CYCLE
If the water container of the SmartWarmer empties before completing a
warming cycle the center control panel light will flash red and beep 3 seconds.
The red flashing light will turn to a solid red and remain on until the unit is
shut off.
Press the ON button
to shut unit off.
DEACTIVATE BEEP
To deactivate the beeping sound –
press the selection button of the starting
temp and content quadrants at the same time and hold for 5 seconds.
One
beep will indicate the beeping is deactivated.
REACTIVATE BEEP
To reactivate the beep –
press the selection button of the starting temp and
content quadrants at the same time and hold for 5 seconds.
The beep will
sound three times to indicate activation.
1. Read all instructions before using.
2. Do not place your hands in or around the warming chamber during heating.
3. To prevent injury, always shake bottle well, and test temperature of contents
before giving bottle to your child. Also, if heating baby food, always test
temperature before feeding your child.
4. To protect against electric shock, do not immerse cord in water or any other liquid.
5. Close supervision is necessary when any appliance is used near children.
4