1
COM
-DB90 Dual Band Mobile Radio
Features
TheCOM-DB90 mobile 2-way radio is unique for its compact body, powerful output and
frequency range design. It's also designed with new and personalized operation menu to give you
easy-to-use and exceptional operation experience. We believe its mini size and cost-effective
price will allow the off-road community the ability to install the radio in more locations without
having to modify their vehicles.
Before operation and to obtain the best performance, we recommend that you read this user
manual carefully to become familiar with the features.
➢
Frequency range VHF 136-174 MHz / UHF 400 – 480 MHz
➢
Color Display
➢
Simple plug and play connection to the S4S intercom
Info & Warnings
IMPORTANT! Changes or modifications to this unit not expressly approved by TheCOM could
void your right to operate this unit. Your radio is set up to transmit a regulated signal on an
assigned frequency. It is against the law to alter or adjust the settings inside the mobile radio to
exceed those limitations. Any adjustment to your radio must be made by qualified technicians.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions;
1.
this device does not cause any harmful interference, and
2.
this radio must accept any interference that may cause undesired operations.
Use only “TheCOM” supplied or approved accessories, cables and headsets.
Turn off your radio prior to entering any area with flammable materials. Do not operate or turn
on your mobile radio at a gas station or while fueling your vehicle.
Do not mount your radio in the area over an air bag deployment area if equipped or in a location
that obstructs the drives sight.
Do not expose the radio to direct sunlight for prolonged periods of time, nor place it close to a
heat source.
Do not transmit for long intervals, as it may overheat the mobile radio.
Do not pressure wash your COM for any reason. To clean, blow off as much dust and debris then
wipe with a damp cloth while the unit is in the OFF position. Allow to dry for several hours then
operations may resume.
