32
Bluetooth
To pair to the S4S Bluetooth:
1.
Power on the S4S
2.
Wait for the audible tone form the intercom. If the radio is paired with the S4S you will
first here the radio tone then you will hear the second more subtle tone that will
increasing in pitch.
3.
Make phone or media device Bluetooth is on and search for the word “The COM”
followed by a unique number/letter code (example “The COM-5B10”).
4.
The select to pair.
Troubleshooting the S4S
If you experience difficulties using your COM we have many technical help references, videos,
blogs and self-help on our website
or the below chart can help t correct
common operation problems. If you have a problem which you believe requires service, please
call first and speak with a service technician at (208) 779-2891. Many problems can be remedied
over the phone without returning the unit for service.
Issue
Check
Intercom will not
power on
Check the vehicles battery to ensure that it is properly working and is
charged.
Check the inline fuses and replace if needed.
Check that the intercom is receiving 12 to 13.8 volts.
Check the input power connections, replace if needed. Make sure the
ground is properly grounded.
Mic will not activate
when I speak into it
Make sure the mic is right against your lips.
Click the VOX button and press the “-” key until you can hear
yourself speak.
Check the headsets connections that they are plugged in all the way.
Sometimes they may appear to be plugged in all the way and they just
need a 1/16
th
of an inch more.
Cannot hear anything Make sure your volume on that specific headset port is turned up.
Check the headset connections and make sure the cords are not
damaged
Cannot hear the radio
transmissions
Verify both radios are on the same frequency / channel.
Make sure you are in range of the other radio, repeater or incoming
transmission.
Check the paired radio volume that it is not all the way down.
Make sure your signal is not obstructed by mountains, buildings or
other obstructions.
Music Volume is too
low
Music volume is controlled by the media device make sure the media
device is tuned up.
