Remove the Old Hose
Turn off the water supply.
Rotate the handle to the open position to relieve water pressure.
Remove the screws to detach the cover and gain access to the
hose connection on the solenoid.
NOTE:
Use a rag to catch residual water draining from the solenoid
and hose when the hose is detached.
Disconnect the hose from the solenoid by holding the
quick-connect tabs in place while pulling the hose out.
Remove the clip from the hose by squeezing the tabs with a
pliers. Retain the clip.
Remove and retain the weight.
Pull the sprayhead and hose out of the spout.
Using a wrench, remove the sprayhead from the hose.
Solenoid
Weight
Hold the tabs
while pulling
the hose.
Cover
Hose
Clip
Kohler Co.
3
1191849-9-A
