Page 16
USB DATA PORT
This system has been updated with a USB port
on the side of the controller. The purpose of this
port is to allow communication with the
Basement Watchdog Connect Modules.
CONNECT MODULES
The Basement Watchdog Connect Modules are
separately sold accessories that will allow the
user to stay connected and receive remote
notifications of potential problems and needed
maintenance while away from home. There are
currently two modules that can be connected:
Basement Watchdog WiFi Module
(Model No. BW-WiFi)
• Sends emails or text notifications and status
alerts to your phone, tablet or computer
• No required monthly or yearly fees or
subscriptions
Model No. BW-WiFi
Basement Watchdog
Home Automation Module
(Model No. BW-HZM)
• Easily connects to compatible monitored
security or home automation system
• Connects using Z-
Wave Plus
Model No. BW-HZM
For more information, please visit
www.BasementWatchdog.com
MAINTENANCE CHECK LIST
Maintenance should be performed 1-2 times per
year
1. Lift the float switch as described at left.
2. Remove all debris from the bottom of the pit
and pump strainer.
3. Remove all debris from the water.
4. Remove all debris from the float switch.
5. Fill the pit with water. Make sure the pump
turns on at the intended level.
6. While the pump is running, make sure the
pump is evacuating water at a good pace and
water is coming out of the 1/8” air bleed hole.
7. Remove the fluid sensor and yellow cap from
the battery and rinse any residue buildup from
the bottom of the battery cap. Replace the
cap and fluid sensor.
8. Check and clean battery terminals.
9. Check battery fluid levels once every four
months.
PARTS & SERVICE INFORMATION
You can receive technical support parts or
service information by calling Glentronics, Inc.
at
800-991-0466, option #3
, or by visiting
the
Basement
Watchdog
website
at
www.basementwatchdog.com
. Send your unit
to the following address if repairs are needed:
Glentronics, Inc.
645 Heathrow Drive
Lincolnshire, IL 60069-4205
