When using an electric appliance, basic safety precautions should always be observed.
BEFORE USING THE X5 VAC, PLEASE READ ALL WARNINGS AND USE INSTRUCTIONS CAREFULLY.
To reduce the risk of fire, electric shock, or injury, observe the following:
When Using the X5 VAC
• The X5 VAC is a re-chargeable, stick vacuum cleaner designed for indoor household use. Do not use for any purpose
other
than described in this User’s Guide.
• The X5 VAC is to be used by adults and is designed for light, domestic indoor vacuuming and car use. Do not use it when driving
or while the car is in motion.
• Use the X5 VAC only with the attachments supplied.
• Before using the X5 VAC, ensure that it is fully assembled with the dust cup and filters, or Liquid Lifter attachment in place.
• Do not use the X5 VAC if it has been dropped, damaged, left outdoors or dropped in water; have it inspected or
repaired at an Authorized Service Centre.
• Do not use outdoors or on wet surfaces or pick up water or other liquids (unless you are using the Liquid Lifter with the X5 VAC)
• Do not use, store or charge the batteries of the X5 VAC outdoors.
• When using or moving the X5 VAC, hold by the handle. Do not lift by holding onto any of the accessories.
• The X5 VAC creates suction. Do not expose your hair, loose clothing, fingers or body parts to openings or moving parts.
• Do not use the X5 VAC to pick up:
o Hot, burning or smoking objects such as cigarettes, matches or hot ashes
o Hard or sharp objects such as glass, or metal objects, such as pins, nails and paper clips
o Large objects which can block airflow
o Liquids (unless you are using the Liquid Lifter)
o Poisonous, corrosive or toxic materials (such as chlorine bleach, ammonia and drain cleaner)
o Flammable or combustible materials or liquids (lighter fluid, gasoline, etc.) or use in the presence of explosive liquids or vapor
A. IMPORTANT SAFETY INSTRUCTIONS
!
WARNING
3
28
F. TROUBLE SHOOTING
- WINDOW CLEANER
Solution
• Remove Wiper Blade and reverse.
If both sides of the Wiper Blade are damaged, replace
with a new Wiper Blade (available from the Customer
Service where you purchased your unit from).
To replace or reverse the Wiper Blade, gently pull the
Wiper Blade sideways out of its slot. Reverse the
Wiper Blade (or replace if damaged) before sliding
back into its slot.
Problem
Streaks when drying
Possible Cause
• Wiper Blade damaged
Table 3. Trouble Shooting
