16
CLEANING THE FILTERS
On a regular basis, clean the Mesh and Fabric Filters to dispose of dust and
debris and to maintain the suction power of the X5 VAC.
Cleaning the Mesh Filter
• Disconnect the Mesh Filter from the Filter Plate by twisting the Filter Plate
counter-clockwise while pulling it away from the Mesh Filter (see 1 & 2).
• Shake out and dispose of dust and debris lodged in the Filter.
• To remove stubborn dirt, use a small brush.
• Rinsing the Filter under luke warm water may be necessary.
Cleaning the Fabric Filter
• Grip and gently pull the Fabric Filter out from the Filter Plate (see 3 & 4).
• Shake out and dispose of dust and debris lodged in the Filter.
• Use a small brush to remove dust and debris from the Fabric Filter.
• Should the Fabric Filter become soiled, it can be rinsed or gently hand
washed in luke warm water. Air dry and do not use hot air blowers such as
a hair dryer for drying.
Do not wash the filters in a washing machine.
D. HOW TO USE THE X5 VAC
(continued)
1
2
3
4
!
IMPORTANT
15
DISPOSING OF DIRT AND DEBRIS
• For best performance and to maintain suction power, it is important to empty
and clean the Dust Cup, Mesh Filter and Fabric Filter after use.
• The Dust Cup is transparent, allowing you to see how much dust and dirt has
accumulated inside the Dust Cup. Once the dust and dirt have reached a level
close to the Mesh Filter, this is an indication to stop and empty the Dust Cup.
Do not accumulate so much dust and debris inside the Dust
Cup that the Mesh Filter becomes covered or immersed. The Mesh Filter must
at all times be above the accumulated dirt and debris.
Tip:
Regular cleaning of the Dust Cup, Mesh and Fabric Filters will ensure
efficient performance and increased lifespan of your X5 VAC.
EMPTYING THE DUST CUP
• Slide the Power Switch OFF.
• Disconnect any accessories from the Dust Cup Nozzle.
• Press the Release Button to disconnect the top of the Dust Cup from the Main
Body (see 1 & 2).
• Unclip the Dust Cup from the Dust Cup Hook (see 3).
• Pull the Filter Plate (with the Mesh and the Fabric Filters) out from the Dust Cup
(see 4 & 5).
• Empty dust and debris from the Dust Cup into a waste container.
Take care when disconnecting the Dust Cup from the Main Body to ensure that
the Filter Plate does not fall out.
D. HOW TO USE THE X5 VAC
(continued)
!
WARNING
1
2
3
4
5
!
IMPORTANT
