Thane Fitness Total Vibes, Instruction Manual

Page: 5 / 12

General Information 5 20
Safety Instructions
Please observe these instructions or you may risk fatal injury.
• The MAXIMUM WEIGHT CAPACITY of “Total Vibes” is 275 lbs (125 kgs).
Persons whose body weight exceeds this limit should NOT use this equipment.
• This equipment is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
• Keep the packaging away from children (danger of suffocation).
• Before assembling the equipment read the assembly instructions through
carefully. Please observe the precise assembly sequence.
• In the interest of your own safety check the equipment for damage (cracks,
holes, loose screw fittings, missing cable ties etc.) before each use. In case of any
damage do not use “Total Vibes” until it has been repaired by an expert. If the
supply cord is damaged, it must be replaced by the manufacturer, its service agent
or qualified technician in order to avoid a hazard.
•
Once you have finished training always disconnect the equipment from the mains
power supply.
• This equipment is intended for normal household use. It should never be used
outdoors.
• “Total Vibes” is not suitable for commercial use.
• The guarantee does not include any damage that has been caused by incorrect
handling, or any wear or attempted repairs instigated by third parties.
• Only use the training equipment once it has been completely assembled and is
fully functional!
• Ensure that the room in which you are training is well ventilated for the duration
of your exercises.A draft during training can quickly lead to a cold.
• If you ever sell your “Total Vibes” or pass it on to another user, please ensure
that you also provide the new owner with these instructions. Only with these
instructions can the new owner use the equipment in complete safety.
• When disconnecting from the mains power supply never pull on the power
cable. Instead always apply light pressure to the plug housing.
• Children should not use the equipment. Children should be supervised to
ensure that they do not play with the equipment.
• Store the equipment away from children.
• Never jump onto the vibration plate.
• The equipment is fitted with overload protection. If the circuit breaker should be
What happens if?
The equipment does not switch on or the power on the LCD display
does not illuminate?
• The network cable is not plugged in at the wall socket
• The main switch has not been turned on
• The program time must be set before the vibration plate can be switched
on in standard operation.
• Once the program time has passed the vibration plate will switch off
automatically. Only once a new program time has been selected can the
vibration plate be switched on again.
• The equipment has been fitted with overload protection. If the circuit breaker
is tripped, reset the circuit breaker. If the problem persists, please contact an
electrician.
• In the event that the plate vibrations have caused the connections,
cable ties etc. to loosen, check all connections and cable ties and where
necessary, tighten them.
• The internal cable is not correctly attached.
Storage
Store Total Vibes in a safe and dry place. Ensure that no one is able to injure
themselves on the equipment. Do not leave the equipment accessible to children.